Intel Pentium MMX
Drive · 2022
Gotek
Works
Details
| Type | Floppy Drive Emulator |
| Interface | 34pin Floppy drive interface, 5V DC power, USB port |
| Links | github.com (Gotek SFRKC30.AT4.35 (AT32F435)(Beige)), github.com (Gotek SFRKC30.AT3 (AT32F415)(Grey)) (external) |
Units
| Unit | Works | State | Year |
|---|---|---|---|
| Gotek SFRKC30.AT4.35 (AT32F435)(Beige) | Unknown | 2022 | |
| Gotek SFRKC30.AT4.35 (AT32F435)(Beige) | Works | Pentium MMX | 2022 |
| Gotek SFRKC30.AT4.35 (AT32F435)(Beige) | Works | i386 | 2022 |
| Gotek SFRKC30.AT4.35 (AT32F435)(Beige) | Works | i486 | 2022 |
| Gotek SFRKC30.AT4.35 (AT32F435)(Grey) | Works | 2022 | |
| Gotek SFRKC30.AT3 (AT32F415)(Grey) | Unknown | 2021 | |
| Gotek SFRKC30.AT2 (AT32F415)(Black) | Unknown | 2020 |
Notes
FlashFloppy
FlashFloppy is a floppy-drive emulator firmware for the ubiquitous Gotek hardware. FlashFloppy is directly compatible with most Gotek devices with a 34-pin header. all of which share the SFR model prefix (eg SFR1M44-U100K, SFRM72-U100).
Configuration
IBM PC compatibles have a non-Shugart interface which must be explicitly configured in FlashFloppy:
- IBM-PC interface mode must be configured
- Strap jumper JC at the rear of the Gotek; or
- Specify via FF.CFG:
interface = ibmpc
- Strap select-line jumper S1 at the rear of the Gotek
- S0, S2, MO should all be left open
Gotek Models
Gotek SFRKC30.AT4.35 (AT32F435)
SFRKC30.AT4.35 (LQFP64): Based on the SFRKC30.AT4 described earlier. Features the KC30 rotary header.
Gotek SFRKC30.AT3 (AT32F415)
SFRKC30AT3 (LQFP48): Missing the original rotary-encoder header, but features the new KC30 rotary header.
Gotek SFRKC30.AT2 (AT32F415)
SFRKC30.AT2 (QFN32): Missing the original rotary-encoder header, but features the new KC30 rotary header. The first revision of this board is also missing the JC jumper location: PC interface mode can be specified only via FF.CFG.
Used in
